Sitemap

LP115

Location: Bet Bet

Australian Soil Classification: Endohypersodic-Endocalcareous, Epipedal, Grey VERTOSOL

General Site Description: Level plain with gilgai microrelief.
Geology: Basalt (Quaternary)

LP115 Landscape

Surface Soil			LP115 Profile
A1	0-10 cm	Very dark brown (10YR2/2), light medium clay; moderate medium sized blocky structure; very strong consistence (dry); rusty root channel mottles present; pH 6.7; abrupt change to:
A2	10-20 cm	Dark greyish brown (10YR4/2), light medium clay; strong coarse blocky structure; strong consistence (slightly moist); most roots stop at 60 cm; pH 7.2; abrupt change to:
Subsoil
B1	20-80 cm	Dark greyish brown (10YR4/2), medium clay; moderate very coarse prismatic structure, parting to strong coarse blocky and moderate fine blocky structure; very strong consistence (moist); pH 8.1; gradual change to:
B21	80-110 cm	Very dark greyish brown (10YR3/2), medium clay; moderate medium sized polyhedral structure; firm consistence (moist); very few (< 2%) hard carbonates (av. 5 mm diameter); very few (< 2%) quartz gravels (av. 6 mm diameter); roots stop at 90 cm; pH 8.5; clear change to:
B22	110-160 cm	Yellowish brown (10YR5/4), medium clay; moderate medium sized polyhedral structure parting to moderate very fine polyhedral structure; very firm consistence (moderately moist); band of soft carbonates runs at 450 angle across horizon.

• Surface cracks and slickensides from 60 cm (vertic properties).
• Clay throughout entire profile.
• Band of carbonates runs across profile.

• Management strategies for all soils should aim to increase organic matter levels in the surface soil; minimise the degradation of soil aggregates and porosity; promote the development of stable biopores; improve the calcium status of the cation complex (when sodium is a significant part – i.e. sodic) and break up any hardpans. Less frequent tillage, using less aggressive implements, and working the soil at optimum moisture contents can all assist in maintaining soil aggregation and porosity as well as reducing the breakdown of organic matter.
• Plant Available Water Capacity (PAWC) is estimated to be medium (estimated at 130 mm) for the profile. This is based on available laboratory data and assumes an effective rooting depth of 80 cm. Rooting depth will be restricted by soluble salts at depth.
• The entire profile displays vertic properties (i.e. slickensides and deep cracking) which indicates that significant shrinking and swelling occurs. This may have implications for engineering purposes (e.g. disturbance to fencelines and foundations). As a result of these soil properties, gilgai microrelief is formed.
• Tillage of clayey soils like these should be avoided if the soil is wet (i.e. wetter than the plastic limit). At such moisture conditions, excessive tillage, trafficking or over-stocking could result in some structural degradation (e.g. compaction) occurring. Ideally, tillage should take place on clayey soils when the soil is drier than the plastic limit – down to at least the tillage depth.

This page contains material sourced from the Victorian Resources Online (VRO) website, originally published by the State Government of Victoria.

The content is provided under the Creative Commons Attribution 4.0 Australia licence (CC BY 4.0 AU).

This material is presented in an archived form and is no longer maintained or updated. It is provided for general information only and should not be relied upon as current advice.

This site is hosted by the Centre for eResearch and Digital Innovation (CeRDI), Federation University Australia. It is not endorsed by Agriculture Victoria.

Agriculture Victoria does not accept liability for any loss, damage or consequences arising from the use of, or reliance on, this material.